2, coarse grinding with a # 600 belt grinding back and forth in the third surface of the workpiece, to achieve the goal of this process is to remove the remaining piece welded joints, as well as appearing on the steps of forming bumps shaped stainless steel processing, welding achieve mouth fillet initial shape, horizontal and vertical basic no big scratches, no bumps, roughness of the surface of the process after this step should be able to reach R0.8mm. Note the inclination angle of belt drive and control pressure good belt machine the workpiece in the polishing process. In general, with the parabolic relatively modest in a straight line! 4, grinding with 1000 # The belt is mainly the amendment before the grinding step process appears small ridge of Wenzhou stainless steel machining, grinding method and the same. The step to achieve the goal is part of the joint grinding the workpiece is not cut section disappeared, a further bright surface, after grinding through the workpiece this step was close to the mirror effect, the surface roughness should be able to reach R0. Wenzhou 1mm stainless steel processing, stainless steel processing Dongguan City, Jin Xing precision provided by Precision Parts Co., Ltd. Huizhou. Huizhou Hing Precision Parts Co., Ltd. (hzjxbp.com) (www.hzjxbp.com) strong, credible, in Huizhou, Guangdong standard mold industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead Jinxing into the brilliant precision and you work for a better future!